15 B2B Content Ideas for Commercial HVAC and Contracting Companies

Most contractor feeds show the same three things: a finished install photo, a holiday message and a line about being licensed and insured. Then the feed goes quiet for a month. Your work happens on roofs and in mechanical rooms, and the people who hire you are facility managers, property managers and owners who never see it.

Your posting rules are tighter than most. Tenants, building staff and clients have privacy and site rules, and some states require your license number on anything that asks for work. So the ideas below start from what you can show legally and from the questions your buyers already ask.

This page gives you 15 ideas in four groups. Each one has a reason it works for commercial work, a fill-in template and, where we found one, a real LinkedIn post that shows the idea. Pick three, film or write them this week, and post them.

All 15 ideas at a glance

#IdeaFormat
1How a rooftop unit is set on the curb, one step at a timeVertical video under 60 seconds, or a walkthrough video
2Four questions to ask before you sign a PM contractDocument carousel, 8 to 10 slides
3What one page of a rooftop unit service report saysDocument carousel, 3 to 5 slides
4Why one building needs heat and cooling in the same weekText post, repeated each spring and fall
5The filing deadline and the records to pull before itText post, posted 2 to 3 weeks before the date
6What EPA Section 608 means for the tech on your roofText post, or a 45-second vertical video
7Crane day notice for tenants and parkingText post, or a notice the property manager can forward
8The crane lift, filmed from the groundVertical video under 60 seconds
9The chiller arrived on time, and here is the crewDocument carousel of job photos, 4 to 6 slides
10The scope in plain words: what came out and what went inText post with two photos
11What a hard install taught the crewText post with one job photo
12Built in the shop before it shippedVertical video under 60 seconds, or a 4-slide carousel
13Meet the tech who answers the 9 PM callVertical video under 60 seconds
14The questions we ask in a commercial tech interviewText post
15What a bid left out of the cheap numberText post

Why LinkedIn works for commercial hvac and contracting companies

Owners, operators and managers are on LinkedIn, and they search it by trade, city and property type. A post that names the building type, the scope and the city gives a facility manager a reason to save your page or forward your post to their boss. Consumer-focused platforms rarely reach that person.

Your posts reach buyers in two places: in the feed of a colleague who comments on your post, and in search when someone types a trade and a city. Write with the words they type, such as RTU, chiller, PM contract, service report, curb and commissioning. Those words also make the post easier for a buyer to find later.

  • Vertical video under 60 seconds: A single job step filmed on a phone in portrait fills the screen on mobile. Keep it to one step, such as setting a unit or mounting a power exhaust, so a viewer can follow it without sound.
  • Document carousel (PDF): Checklists and question lists work better as slides people swipe through. Export at 1080 by 1350 pixels, keep it to 8 to 12 pages and keep the file under 10 MB so it loads on a phone.
  • Text post: For a bid lesson, a compliance date or a team update, the words carry the post. Put the main point in the first 210 characters, since that is what shows before the See more link.

15 LinkedIn content ideas for commercial hvac and contracting companies

Authority and how-tos

These ideas show a building manager how you think about their equipment, so they remember your name when a unit fails.

Vertical video under 60 seconds, or a walkthrough video

1. How a rooftop unit is set on the curb, one step at a time

Why it works: Facility managers approve the scope without ever climbing a roof. A short walkthrough of one step, such as fitting a curb adapter or mounting a power exhaust, shows them the work they are paying for. Use the part names your crew uses on site.

TemplateStep [number] of a [brand and tonnage] rooftop unit swap: [the step, e.g. fitting the curb adapter]. The mistake we see on this step is [mistake]. Here is how we check it before the crane leaves.
The caption lists what the viewer will see, from mounting to airflow, and links to the full install video.LinkedIn

Document carousel, 8 to 10 slides

2. Four questions to ask before you sign a PM contract

Why it works: Building managers vet vendors with a list of questions. A slide set with the questions and what a good answer sounds like is something they save and forward. Your own answers sit right beside the question, so the post sells you without a pitch.

TemplateSlide 1: Four questions every [property type] manager should ask a commercial HVAC contractor. Slide 2: Who does the work, your employees or subcontractors? Slide 3: What does a service report show after each visit? Slide 4: How is per-unit pricing built? Slide 5: Who answers at 9 PM, and what is the response time in writing?
A question list written for facility managers, the same format you can build from your own intake calls.LinkedIn

Document carousel, 3 to 5 slides

3. What one page of a rooftop unit service report says

Why it works: Many managers have never seen a PM report that lists readings for each unit. Showing one page, with the address and serial number removed, proves you document every visit. It also tells them what to ask for from any contractor they interview.

TemplateOne page from a PM visit on a [tonnage] rooftop unit at a [property type], address and serial removed. Line 1: what we inspected. Line 2: what we measured. Line 3: what is trending toward failure. Ask any contractor for this before you sign.
A preventive maintenance post aimed at facility managers, on the same subject as the service report.LinkedIn

Text post, repeated each spring and fall

4. Why one building needs heat and cooling in the same week

Why it works: Spring and fall are when a building can need heat in the morning and cooling by afternoon. A manager who sees that in their own building will call. This topic comes back every year, so you can post it on a schedule.

TemplateIt is [month] in [city]. The building needs heat at 7 AM and cooling by 2 PM. This week that puts the most strain on [system, e.g. the air handlers or boilers] because [reason]. If you see [symptom] in the next two weeks, call us before it becomes a no-heat call.
A shoulder-season post that explains why a single building can need both heating and cooling on the same day.LinkedIn

Deadlines and compliance

Deadlines and rules are the posts facility managers save, because they keep the building out of trouble.

Text post, posted 2 to 3 weeks before the date

5. The filing deadline and the records to pull before it

Why it works: Compliance dates come around every year, and building staff often start the paperwork late. A post that names the rule and lists the records to check tells them what to pull and shows your company knows the rule. Name the filing exactly as the city or state does.

Template[Date] is the deadline for [filing name] in [city or state]. Before then, check these records for each [equipment type]: [record 1], [record 2], [record 3]. Comment CHECKLIST and we will send you the full list.
A deadline post that names the NYC filing, the records to reconcile and the maintenance items to fold into the PM plan.LinkedIn

Text post, or a 45-second vertical video

6. What EPA Section 608 means for the tech on your roof

Why it works: Refrigerant work is regulated, and the rule is short. A plain explanation of who needs a certification tells a facility manager what to ask their vendor, and gives them proof that your techs meet the rule. It is also a topic few contractors explain without jargon.

TemplateAny technician who maintains, services, repairs or disposes of equipment that could release refrigerant needs a Section 608 certification. Our techs hold [certification types, e.g. Type II and Universal]. Ask any contractor for proof before they open a [system type] on your site.

Text post, or a notice the property manager can forward

7. Crane day notice for tenants and parking

Why it works: A crane lift over an occupied building affects people who never hired you, such as tenants, a restaurant on the ground floor or staff who park under the swing. A clear notice shows the property manager you planned the day, and gives them something to forward without rewriting it.

TemplateCrane day at [building name, only if the owner approves it]: [date], [time window]. The crane will lift [what]. [Parking location] will be closed from [time] to [time]. Questions go to [role, e.g. our project manager] at [phone].

Proof from the job

These posts show the work itself, with the rules about people, sites and clients built into how you film and write them.

Vertical video under 60 seconds

8. The crane lift, filmed from the ground

Why it works: A crane lift is one of the easiest job moments to film, and a ground-level shot keeps the crew and the tenants out of frame. Captions help a viewer with the sound off follow the steps. Post it the week of the lift, while the building owner is still following the job.

TemplateLift day at a [building type] in [city]. The unit weighs about [weight] and the wind window was [window]. Here is the lift in [seconds] seconds. What made it harder than it looks: [one sentence].
A crane lift video whose caption names the scope and ends with an invitation to commercial buyers.LinkedIn

Document carousel of job photos, 4 to 6 slides

9. The chiller arrived on time, and here is the crew

Why it works: Equipment delivery is a risk that owners and managers track, so an on-time arrival is worth a post. Naming the crew credits the people who did the work, and those people share posts with their own networks.

TemplateA [tonnage] [manufacturer and type] arrived at [building type] on [day]. Slide 2: what the crew did first. Slide 3: what the owner had to approve. Slide 4: thanks to [names] for [task]. Next up: [next milestone].
A delivery post with the tonnage and model in the first line, followed by crew photos and names.LinkedIn

Text post with two photos

10. The scope in plain words: what came out and what went in

Why it works: Managers compare bids by scope. A post that lists what was removed, what the curb adapter does and what was commissioned makes the scope easy to read, and it shows you handle the job from start to finish. Use the model numbers your client already sees on the purchase order.

TemplateA [building type] had a [old model] swapped for a [new model]. Scope: [disconnect and dispose of the old unit], [prepare the curb], [fit the adapter], [connect duct, electrical and gas], [commission and check]. Ask us what your unit needs.
The caption lists the removal, curb, adapter and commissioning steps in order, with the old and new model numbers.LinkedIn

Text post with one job photo

11. What a hard install taught the crew

Why it works: A tech who writes down what went wrong and what they changed sounds like someone a manager can trust on their roof. A lesson from the crew on safety or sequencing goes further than a finished photo, and it reads as first-hand.

TemplateWe pulled a [unit type] off a [building type] this [season]. What went sideways: [one problem]. What we changed on the next one: [one change]. The rule our crew uses now: [one rule].
A first-person account of a rooftop swap that names the crane-lift safety and team organization lessons.LinkedIn

Vertical video under 60 seconds, or a 4-slide carousel

12. Built in the shop before it shipped

Why it works: Owners and managers rarely see what happens before a truck leaves. A pre-piped skid, a wired control panel or prefab duct shows that your work is organized before it reaches their roof. It also shows a project is moving, which gives buyers a reason to call.

TemplateBefore this [system type] left our shop: [what was built, e.g. the pre-piped skid]. Why we build it here: [reason, e.g. fewer hours on the roof]. Next stop: [site type] in [city] on [date].

People and conversation

These posts put a person in front of the buyer. They draw comments from people who may call you.

Vertical video under 60 seconds

13. Meet the tech who answers the 9 PM call

Why it works: The tech who goes on the roof after hours is the person the manager will talk to. A 30-second introduction with what they do and what they have worked on gives the manager a face and a name to call. Keep the shot on the work and out of anyone's face.

TemplateThis is [name], a [title] with [years] years on commercial [system type]. This week [name] is on [job type] at a [building type]. The first thing [name] checks on every [system type] is [item].
Introduces the technicians behind commercial systems and ties their work to the buildings those systems serve.LinkedIn

Text post

14. The questions we ask in a commercial tech interview

Why it works: Commercial work needs trained techs, and a hiring post shows buyers the standard you hold. Listing the interview questions draws techs who want that standard and reaches the people who would refer them to you.

TemplateWe are hiring a [role] for [system type] work in [city]. In the interview we ask: [question 1], [question 2], [question 3]. You need [certification, e.g. EPA 608 Type II] to start. Message [name] if you want the details.

Text post

15. What a bid left out of the cheap number

Why it works: Managers compare bids that look alike on the first page. A short list of what a low bid often leaves out gives them a checklist for comparing. Write it as a lesson from your own bid review, and do not name a competitor.

TemplateTwo bids on a [unit type] replacement, same tonnage. One came in [amount range]. Ours included [curb adapter, commissioning, disposal, after-hours response]. Before you compare bids, check whether each one includes [item].

Best practices for LinkedIn as a commercial hvac or contracting company

How often to post

Start with two posts a week for the first month: one proof post and one how-to, deadline or people post. That is a schedule a small crew can film and write around real jobs. Judge it after six weeks by the comments from people who run buildings, not by likes.

Tools that help

  • Sycamore: Add word-synced captions to a short job-site or walkthrough video, so a viewer with the sound off can follow each step.
  • PowerPoint or Google Slides: Build the carousel slides at 1080 by 1350 and export a PDF for a document post. You do not need a design tool for a checklist.
  • LinkedIn document and video posts: Upload the PDF as a document post and the video directly to the post. Keep the PDF under 10 MB so it loads on a phone.

Do

  • Post a job only after the building owner has approved the photos or clip in writing, and after the unit is running.
  • Name the building type, the city and the scope, not the client's name or street address, so the post still works for buyers.
  • Put your state license number on your profile and on posts that ask for work, in states that require it, such as California, Texas and Florida.
  • Put the main point in the first 210 characters of a text post, since that is what shows before See more.
  • Use the words your buyers type: PM contract, RTU, curb, commissioning, service report.

Don't

  • Don't show tenants, badge numbers or a building's security layout. Strip photo metadata before you upload.
  • Don't film a crane lift over occupied space without the site contact's sign-off.
  • Don't post how-to steps that have building staff handle refrigerant or live electrical. Refrigerant work needs a certified tech.
  • Don't name a competitor or a competitor's price in a bid post.
  • Don't post a job photo every day. Mix in a how-to, a deadline or a person.

More content ideas

More LinkedIn ideas: Counselors, Creative and Branding Agencies, Creator Economy Founders, Creators Landing Brand Sponsors, Financial Advisors, Fractional Executives and Solopreneurs

Edit your videos to go viral