There's no single correct color grading order in DaVinci Resolve, but the most reliable starting point is the "CST sandwich": convert your footage into a working color space first, grade in the middle, then convert to Rec.709 for delivery.
Build the CST sandwich
This setup gives every clip the same starting point. Most tutorials stack far more nodes than you need. Unless the footage has a problem, three or four nodes are enough.
- Open the Color page and select your clip.
- Add a Color Space Transform node as your first node. Set Input Color Space to your camera's log profile, set Output Color Space to DaVinci Wide Gamut, and set Output Gamma to DaVinci Intermediate.
- Add a second node for brightness and contrast only. Set Sat to 0 in the Color Wheels panel, then adjust Lift, Gamma and Gain until the image looks right in black and white. Your eyes read light levels better than color, so a good black and white image puts you most of the way there.
- Add a third node for overall color. Bring Sat back up and adjust the color balance and saturation here.
- Add a final Color Space Transform node at the end. Set Input Color Space to DaVinci Wide Gamut and Input Gamma to DaVinci Intermediate. Then set both Output Color Space and Output Gamma to Rec.709 for delivery.
- Add a LUT last, and only if you need one. Check that the input the LUT expects matches the color space at that point in the chain.
If that doesn't work: the three-node method
Another common approach uses three serial nodes in this order:
- Exposure, with contrast included, since both control the overall brightness of the image.
- Balance, which sets the tonality of the whole shot. This goes beyond white balance.
- Saturation.
This method works well with solid color management. Most workflows don't mix well, so don't combine this with the CST sandwich in the same grade. Try one method on a few projects, then try the other and compare the results.
Before you use any LUT, read its name and check its expected input and output. A LUT named like "SLog3 to Rec709" expects S-Log3 footage and outputs Rec.709. Use it only when your footage and your output match what the LUT was built for.
Multi-camera and mixed-codec projects
If your project mixes cameras or codecs, use this node order:
- A Color Space Transform to DaVinci Wide Gamut.
- A primary node for offset and contrast.
- A balance node, only if white balance wasn't handled in camera.
- A saturation node using the HSV tool with the H and V switches turned off.
- Secondaries and power windows, placed in parallel.
- A Color Space Transform to Rec.709.
- An optional look or grade.
If every clip shares the same camera and codec, you can handle color at the timeline level and make your adjustments between the two transforms. Save the grades you reuse as groups or power grades so you don't rebuild them each time.
Learn the reasoning from official training
Blackmagic Design offers free training for each Resolve page. Open the Help menu and choose the training link. Then scroll to the Training Books section, which includes sample projects, exercises and quizzes for the Color page. Work through the Color section before you watch more videos, so you learn why each step comes in its order.
FAQ
Is there one correct DaVinci Resolve color workflow?
No. Several valid methods exist, and most of them don't mix well. Try one method on a few projects, then compare how each one works for you.
How many nodes do I need?
Usually three or four. Long node stacks are rarely needed unless the footage has a problem.
Where do LUTs go in the workflow?
Add a LUT last, after the grading nodes, and only if you need it. Check that its expected input matches your footage.
Where should I learn the reasoning behind a workflow?
Start with Blackmagic Design's free official training, linked from the Help menu in Resolve. Work through the Color page section before you watch more videos.
Turn your raw videos into viral clips
edited for you by Magic Edit
Get Started